Pneumatic Carving Tools

Pneumatic Carving Tools

THE BARRE SHORT STROKE PNEUMATIC CARVING TOOL: TYPE B

the "TYPE B" is designed to run very smoothly at all power levels. Available in Bantam, 1/2" 3/4" and 1" sizes; all are able to provide excellent power for heavier work yet still run smoothly at low power for fine work. All sizes also have a shaped fingergrip for comfort and ease of control.

Specification Sizes

BANTAM 1/2"B 3/4" B 1" B

Diameter of piston 15/32" 1/2" 3/4" 1"

Outside diameter 7/8" 1-1/4" 1-1/2" 1-5/8"

Length overall 5" 5-3/4" 6-3/4" 7-1/2"

Weight - lbs. - oz. 0-9 1-8 2-12 3-8

Size Shank 5/16" 1/2" 1/2" 1/2"

Air consumption in cu. ft. 3 4 4 6

THE BARRE "DALLETT STYLE" PNEUMATIC CARVING TOOL: TYPE D

The BARRE "TYPE D" tools provide the maximum power per size ratios available anywhere. By using a longer stroke than our other pneumatic tool, the TYPE D strikes a harder blow over the full power range. Its simple design and rugged construction afford reliable and economical operation on the most demanding work. The 1" and 1-1/4" sizes are suitable for larger roughing applications and offer a shaped fingergrip for greater control and comfort during extended use. The 1/2" and 3/4" sizes are perfect for finer jobs where detail and precision are required.

Specification Sizes

1/2"D 3/4"D 1"D 1-1/4"D

Diameter of piston 9/16" 3/4" 1" 1-1/4"

Outside diameter 1-1/8" 1-5/16" 1-11/16" 2"

Length overall 5-3/4" 6-3/4" 7-7/8" 8-3/4"

Weight - lbs. - oz. 1-4 1-14 3-8 5-10

Size Shank 1/2" 1/2" 1/2" 5/8"

Air consumption in cu. ft. 3 4 6 8

Marenakos Rock Center
30250 SE High Point Way
Preston, Washington
Tel: (425) 392-3313
Fax: (425) 392-7332